- 66 -
EWEB / EWEB WIFI
IP Addr
0.0.0.0
Web Port
80
DNS2
0.0.0.0
DHCP
NO
Subnet Mask
0.0.0.0
DNS1
0.0.0.0
Gateway
0.0.0.0
User Password
Socket Port
2101
Inst. Password
DDNS Type
0
DDNS Password
DDNS Username
0
DDNS WebSite
WI FI
ENT
SSID
The following steps must be configured on the basis of the parameters relating to the network to which
the device is connected:
IP Addr:
the IP address that allows access to the XWEB board
Example:
To enter the address
192.168.1.5
, the numbers must be split as follows
Subnet Mask:
Network technical parameter.
Example:
To enter the address
255.255.255.0
, the numbers must be split as follows
Gateway:
Network technical parameter.
Example:
To enter the address
192.168.1.1
, the numbers must be split as follows
DNS1:
Network technical parameter.
Example:
To enter the address
192.168.1.1
, the numbers must be split as follows
DNS2:
Network technical parameter.
Example:
To enter the address
192.168.1.10
, the numbers must be split as follows
DHCP: NO
: DHCP service deactivated
YES
: Uses the DHCP service for network parameters
Web Port:
Access port through browser; usually configured with a value of 80
HTTPS Port:
Secure access port via Browser; 443 is the value that is normally configured.
This parameter can only be used with pre-set peripherals (such as EWEB / EWEB WIFI).
Socket Port:
Access port for connection to PC via the proprietary AVS protocol
E.g.:
for connection through ELM and XWIN, the value of 2101 is usually configured
Inst. Password:
Authentication code for publication of graphic maps
User Password:
Master authentication code for registering user access password
DDNS Type:
0 = None; 1 = No IP
The following parameters must be configured only when using a dynamic DNS service:
DDNS Username:
Parameter supplied by DDNS service manager
DDNS Password:
Parameter supplied by DDNS service manager
DDNS WebSite:
Parameter supplied by DDNS service manager
WI FI:
In the case of WIFI connection, the following steps must be configured according to the parameters of the
network to which the device will be connected
SSID:
the name that allows the users to identify the WIFI network. Technical parameter of the network.
KEY:
Network technical parameter.
Crittografia:
Network technical parameter.
Firmware update: NOT USED: internal use only.
Press
(CLR)
to vary
To access other entries press
(
)
or
(
)
Writing keys::
(1)
abc1
(2)
def2
(3)
ghi3
(4)
jkl4
(5)
mno5
(6)
pqr6
(7)
stu7
(8)
vwx8
(9)
yz.
(0)
_’0
Press arrows
(
)
and
(
)
to position the cursor
Press
(ENT)
to confirm
Press
(ESC)
to go back
EWEB/EWEB WIFI
ENT
from previus
page
HTTPS Port
443
IP Addr
192.168.1.5
Subnet Mask
255.255.255.0
Gateway
192.168.1.1
DNS1
192.168.1.1
DNS2
192.168.1.10
KEY
Encryption
Inactive
Firmware update
ENT
Firmware update
. . . running
to following
page
