Avocent MERGEPOINT 53XX SP MANAGER, Installer/User Manual

Page: 144 / 204

130
MergePoint Service Processor Manager SP53XX Installer/User Guide
Targets
The following table shows the target map for the MergePoint SP manager. To find detailed
information about individual targets, see Viewing targets, properties and commands for a target on
page 131.
Table 8.3: Map of Targets and Descriptions
Targets Description
/admin1 The top level admin domain.
/admin1/map1 The MergePoint SP manager itself. For an example procedure
using this target, see To reset MergePoint SP manager: on
page 135.
/admin1/map1/clpsvc1/clpendpt[n] A CLP session on MergePoint SP manager. For an example
procedure using this target, see To change a session’s output
format: on page 137.
/admin1/map1/enetport1 Ethernet port of MergePoint SP manager. For an example
procedure using this target, see To show ethernet port of
MergePoint SP manager: on page 133.
/admin1/map1/group[n] The user group management. For an example procedure using
this target, see To manage a user group: on page 136.
/admin1/map1/hostgroup[n] The server group management. For an example procedure
using this target, see To manage a server group: on page 136.
/admin1/map1/ipendpt1 IP address of MergePoint SP manager. For an example
procedure using this target, see To show IP address of
MergePoint SP manager: on page 132.
/admin1/map1/nodemanagesvc1 The servers on the side navigation bar. For an example
procedure using this target, see To add a server to the side
navigation bar: on page 135.
/admin1/map1/oemavocent_discoverysap1 The automatic discovery service access points (IP address
range for the IP addresses of the service processors). For an
example procedure using this target, see To configure
automatic discovery: on page 134.
/admin1/map1/sshsvc1 The SSH service on the appliance. For an example procedure
using this target, see To show Telnet and SSH configuration: on
page 133.
/admin1/map1/swid[n] To upgrade the appliance and roll back to the previous version.
For an example procedure using this target, see To upgrade
MergePoint SP manager firmware: on page 137 and see To roll
back the firmware to a defined version: on page 137.