Avocent MERGEPOINT 53XX SP MANAGER, Installer/User Manual

Page: 110 / 204

96
MergePoint Service Processor Manager SP53XX Installer/User Guide
To configure groups on a RADIUS authentication server:
1. On the server, open the /etc/raddb/users file for editing.
2. Assign groups to a user in the FramedFilterId attribute.
3. Use the format FramedFilterId=:group_name=<Group1>[,<Group2>,..., <GroupN>];, as
shown in the following example:
groupuser1
AuthType= Local, Password =”xxxx”
ServiceType=CallbackFramedUser,
CallbackNumber=”305”,
FramedProtocol=PPP,
FramedFilterId=”:group_name=<Group1>[,<Group2>,..., <GroupN>];”,
FallThrough=No
NOTE: If the FrameFilterId already exists, append the group_name declaration to the string starting with a colon
(:). Make sure a final semicolon (;) is at the end of the declaration, as shown in the example.
4. Save and quit the file.
To configure a RADIUS authentication server on the MergePoint SP manager:
1. Log into the console as the root user.
2. Open the / etc/raddb/server file for editing or create the file.
3. Make an entry for the RADIUS server (auth1), an accounting server (acct1) and make an entry
for a second RADIUS authentication server (auth2) and for a second accounting server (acct2),
by performing the following steps for each server.
4. Follow the file configuration directions shown in the following example.
# For proper security, this file SHOULD have permissions 0600,
# that is readable by root, and NO ONE else. If anyone other than
# root can read this file, then they can spoof responses from the
server!
# #
There are 3 fields per line in this file. There may be multiple
# lines. Blank lines or lines beginning with '#' are treated as
# comments, and are ignored. The fields are:
#
# server[:port] secret [timeout]
#