Avocent MERGEPOINT 53XX SP MANAGER, Installer/User Manual

Page: 126 / 204

112
MergePoint Service Processor Manager SP53XX Installer/User Guide
OK
cli>
set network hosts 192.168.160.11 name fruitbat
‘name’ doesn’t make sense in its contest.
[set network hosts 192.168.160.11 name fruitbat] Failed: Invalid input
cli> get network hosts 192.168.160.11 alias: fbat
Words 4 and following were ignored.
get | show
The
get
command retrieves the value assigned to a parameter. When no parameters are listed, the
whole parameter tree is displayed. If full parameters are specified, the assigned value is displayed.
Synopsis
get | show parameter(s)
Examples
cli>
get network hostname
anchovy
cli> show network resolv domain
avocent.com
When get is entered with a partial parameter, all the subtrees display. In the output, if a value is
assigned, the parameter preceding the value ends with a semicolon.
cli> get network
network interface failover: no
network interface eth0 method: dhcp
...
network hosts 127.0.0.1 name: MergePoint
network hosts 127.0.0.1 alias: localhost
network st_routes
cli>
If the system assigns default values, default values are shown next to the automatically added
parameter name, as in the following example, which was entered on the MergePoint SP manager
before any configuration has been done.
cli> get network interface eth0
network interface eth0 method: dhcp
network interface eth0 address: 192.168.160.10
...