Chapter 2: Installation and Setup
37
c.
In the DST start fields, select the start dates of daylight saving time from the pop-up
calendar.
d.
In the DST end fields, select the end dates of daylight saving time from the pop-up
calendar.
8.
Click Apply.
To enable or disable the Telnet or SSH protocol:
1.
Click System - Setting.
2.
Select or deselect Telnet or SSH to enable/disable the respective protocol.
3.
Click Apply.
NOTE: (For the MergePoint SP5324/SP5340 appliance ONLY) In some cases, such as soon after an upgrade,
enabling the SSH protocol may be delayed while the service processor initiates.
PCMCIA for the MergePoint SP5324/SP5340 Appliance
The front panel of the MergePoint SP5324/SP5340 appliance has two PCMCIA card slots
supporting compact Flash PC cards.
Two PC cards of the same type must be installed with the card in slot 1 configured first, followed
by the card in slot 2. Two PCMCIA cards of different types can be installed in any order.
To install a PCMCIA card:
1.
Insert a PCMCIA card into a front slot and slide the card in all the way.
2.
Click System - PCMCIA.
3.
Select the slot you inserted the card into and click Insert.
NOTE: Always use the Eject button in the MergePoint SP manager to eject the PCMCIA card.
To eject a PCMCIA card:
1.
Click System - PCMCIA.
2.
Select the slot for the card you are removing and click Eject. Then physically remove the card
from the PCMCIA slot.
Completing the MergePoint SP Manager Installation
Whatever method is used to enable access to the web interface, the root user should always log into
the MergePoint SP manager console and change the password from the default. The admin user
cannot change the root user password, and the root user cannot log into the web interface to change
the root password. The following options are available:
•
Until an IP address is available for the MergePoint SP manager, the root user can only change
the root user password by logging in locally through the console port.
Summary of Contents for MERGEPOINT 53XX SP MANAGER
