Avocent MERGEPOINT 53XX SP MANAGER, Installer/User Manual

Page: 95 / 204

Chapter 5: Accessing Target Devices Using DirectCommand or Native IP
81
To enable Native IP connections (temporarily):
Run the command by entering the following:
admin@MergePoint:~$ nativeipctl on
client <host ip address> <device IP address>
For example, to enable temporarily direct access from 172.26.27.15 to 172.26.25.160:
admin@MergePoint:~$ nativeipctl on client 172.26.27.15 172.26.25.160
To disable Native IP connections (temporarily):
Run the command by entering the following:
admin@MergePoint:~$ nativeipctl off type
t client <host ip address> <device IP address>
To enable Native IP connections (permanently):
Run the command by entering the following:
admin@MergePoint:~$ nativeipctl on type
p client <host ip address> <device IP address>
For example, to enable permanently direct access from 12.23.56.78 to 172.26.25.157:
Run the command by entering the following:
admin@MergePoint:~$ nativeipctl on type
p client 12.34.56.78 172.26.25.157
To disable Native IP connections (permanently):
Run the command by entering the following:
admin@MergePoint:~$ nativeipctl off type
p client <host ip address> <device IP address>
To list all the available Native IP connections:
Run the command by entering the following:
admin@MergePoint:~$ nativeipctl list
connections