Avocent MERGEPOINT 53XX SP MANAGER, Installer/User Manual

Page: 72 / 204

58
MergePoint Service Processor Manager SP53XX Installer/User Guide
To change the host name of the MergePoint appliance:
1. Select Network - Host Table.
2. Enter a host name for the MergePoint appliance in the Name field.
3. Click Apply.
To add an entry:
1. Select Network - Host Table, then click Add.
2. Enter the required information in the fields provided, then click Apply.
To edit an entry:
1. Select Network - Host Table.
2. Click the IP address link of the entry you would like to edit and follow the on-screen
instructions.
To delete an entry:
1. Select Network - Host Table.
2. Select the entry(s) you would like to delete and click Delete.
Static routes
Admin users can use the Static routes feature to manually add, edit or delete existing static routes.
To add a static route:
1. Click Network - Static Routes.
2. Click Add.
3. In the Network Address field, type a network IP address of the destination host or specify a
network in the form networkIPaddress/mask_length (also referred to as prefix/length).
4. From the Type drop-down menu, select Interface or Gateway as you desire.
5. If you select Interface, then choose an interface from the Interface/Gateway drop-down menu.
-or-
If you select Gateway, then in the Interface/Gateway field, type the IP of the gateway.
6. In the Metric field, type the number of hops to the destination.
7. Click Apply.
NOTE: To set a default route, select Network - Network Settings.
To edit a static route:
1. Click Network - Static Routes.
2. Click the network address link of the static route you want to edit and follow the on-screen
instructions.