Avocent MERGEPOINT 53XX SP MANAGER, Installer/User Manual

Page: 48 / 204

34
MergePoint Service Processor Manager SP53XX Installer/User Guide
NOTE: This feature is not supported on target devices equipped with iLO.
NOTE: The maximum number of default target users is five.
NOTE: Do not use reserved words for usernames. Reserved words that have special meaning for the
MergePoint SP manager are listed in Reserved words (do not use as usernames) on page 22.
To add a default user:
1. Click Targets - Default Target User - Add.
2. Specify the information for the default target device user and click Apply.
To delete a default user:
1. Click Targets - Default Target User.
2. Select the user you wish to delete and click Delete.
To edit a default user:
1. Click Targets - Default Target User.
2. Click the username you want to modify.
Managing user accounts on target devices
The Users window lists all user accounts for the selected target device. MergePoint SP manager
users with Admin privileges may change user account information on target devices.
NOTE: This feature is available for target devices that have user management functions. Different types of
devices have different user management systems. For example, while some may allow adding, editing and
deleting user accounts, others may only allow editing user accounts.
To edit a user account:
1. In the side navigation bar, click a target device name.
2. Click the Configuration tab.
3. In the top navigation bar, click Users.
4. Click the name of the user you want to modify or the Edit link next to the user.
5. Enter the desired changes, then click Apply.
To create a new user account:
NOTE: Some target devices support limited users. In this case, you are not able to add a new line of user
information. However, you may create a new user account by defining a username, password and user privilege
to a user that does not have a username.
1. In the side navigation bar, click a target device name.
2. Click the Configuration tab.