AUKS AL-H18/4DR1(U), Service Manual

Page: 143 / 161

AUKS DC Inverter 1 Drive1 50HZ R410A Controller
143
function. Push the button for the second time, cancel the swing function.
Feeing button: Press this button for setting the feeling function.The LCD shows the actual room
temperature when the function set and it shows the setting temperature when the function cancelled.The
function is invalid when the appliance at the fan mode.
TIMER/CLOCK button :
Clock Setting: Normally display the clock set currently (display 12:00 for the first electrifying or
resetting). When press the button for 5 seconds, the time display zone will flicker, then press
【
+
】
and
【
-
】
button and to adjust hour that uses 12-hour clock including “A.M.” and “P.M.” time; press the button
again to complete the setting.
Timer setting: Press the button to set TIMER ON/OFF , press the button then “ON” will flicker on the
display screen. then press 【 + 】 and 【 - 】 button and to adjust hour that uses 12-hour clock including
“A.M.” and “P.M.” time; press the button again to complete the setting. The “OFF” setting is the same
methods.
Remark: When setting functions such as mode, temperature, air port and air velocity, display
screen displays all presetting parameters and remains constant; after reaching presetting time,
air conditioner will automatically start as per presetting state.
After setting timing ON and OFF function, pressing button of
【
Timer/Clock
】
can cancel timing
setting.
SLEEP button :
1. Press the button to the sleeping indicator light of indoor unit flashes on;
2. After the setting of sleeping mode,the cooling operation enables the set temperature to increase 1
℃
after 1 hour and another 1 ℃ auto matically after 1hour.
3. After the setting of sleeping mode,the heating operation enables the set temperature to drop 2
℃
after 1 hour and another 2
℃
auto matically after 1hour.
4. The air condition runs in sleeping mode for 7hours and stops automatically.
Remark:Press the mode or ON/OFF button,the remote controller clears sleeping mode away.
SCREEN button :Press the button to let the LCD display working or not by pressing the button.
Remote conntroller:H series LCD display instruction
POWER button : Switch the unit ON/OFF.
NOTE
：
ON/OFF display:
when the remote controller is on the
state, the LCD will be display or not.
Digital display:
Under the state of normal
working, it
displays setting temperature. While
the feeling function is start, it will
display room temperature, and under
the state of timer mode, it will display
setting timer.
NOTE:Fan speed operation
When the air volume is greater, the noise
will be higher, The wind temperature
will rise when cooling mode,and drop
when heating mode;
Please selecte the appropriate F speed,
in order to achieve the more
comfortable rest environment
.