AUKS AL-H18/4DR1(U), Service Manual

Page: 140 / 161

AUKS DC Inverter 1 Drive1 50HZ R410A Controller
140
2. Remote Controller
2.1 Basic condition of remote controller
Name Figure Basic condition for operation
Remote
controller
1.Power source
Use 2 pcs No 7 batteries,working voltage:2.0V-5.0V;
2. Signal frequency:infrared frequency 38kHz;
3. Remote distance:max working distance is7m
。
Key operation introduction:
1.Temperature setting range 16
℃
-32
℃
;
2. when heating:When indoor coil temp. is lower than request, the fan will
change into low speed,.
After the temp. reach to the request temp.,it will change into setting fan
speed.
2.2 Function
Remote conntroller: L series
Note:
 Remote controller outside buttons only valid when surface cover is closed.
 Two white button is only for addressing set. If it has been set, remember not to reset by yourself.
1. “ON/OFF”button
* Press this button, the unit will start or stop, which can clear the timer or sleeping function of last
time.
2. “SPEED” button
* Press this button, speed will change as below:
3. “ / ” button
* When press button, the setting temperature will be increased by 0.5 ℃ .When press
button, the setting temperature will be decreased by 0.5
℃
.
* The temperature will be changed quickly by pressing the button continuously and setting
temperature range is 16
℃
to 32
℃
.