AUKS AL-H18/4DR1(U), Service Manual

Page: 145 / 161

AUKS DC Inverter 1 Drive1 50HZ R410A Controller
145
3. Wired controller
3.1 Basic condition of wired controller
Name Figure Basic condition for operation
Wired
controller
1. Power source:voltage DC 12V;
2. Work temperature range of PCB:(-10~+70)
℃ ;
3. Work humidity range of PCB:RH20%~RH90%;
3.2 Function
Wired controller: XK-02
ON/OFF button
:
Switch the unit ON/OFF.
Mode button : Select mode , push the button one time, then the operation modes will change in turn as
below: Auto-Cooling-Dehumidify-Heating
Temp +/- button : Press the button can adjust temperature. Temperature adjustment range: 16~32
℃
.
Fan button : Change the fan speed will change in turn as :Auto-Low-Medium-High-Auto
Swing button : Press this button for the first time when operation, it will start the swing function. Push the
button for the second time, cancel the swing function. (The function is available matched with the
concerned unit)
Health button : Press this button change to switch mode: Health mode.
SLEEP button :
1. Press the button to the sleeping indicator light of indoor unit flashes on;