70
User Manual smar-tel-i
Progr
am
ming
The changes that you have made with smar-tel-i still remain intact.
If the phone is installed as “Direct Exchange Phone“ in the AUERSWALD PBX, then
an exchange access code is not entered as a prefix to the server telephone number.
For each other additional smar-tel-i that is connected to your AUERSWALD PBX, an update
can be executed with an internal connection to a telephone having the newest version of the
software in order to save telephone charges.
In this regard, you do not need to know which or if a telephone has the newer software. The
AUERSWALD PBX automatically checks to see which smar-tel-i that is connected to it has
the newest software.
The start and course of the update are for the most part exactly as described in the previous
chapter except for the telephone number.
Delete the server telephone number and enter the following program sequence: „7 P
971“.
(P stands for the public password of the PBX (“2“ as factory default setting). The number
sequence is “7 2 971“, if the public password of the PBX has not been changed)
h
You have the option of automatically starting this internal software update from the
PBX (refer to the chapter Automatically Starting smar-tel-i Software Updates on
page 72).
If the update is prematurely aborted with the message “Software is up-to-date“ then
there is no smar-tel-i connected with newer software.
If two ISDN devices have the same MSN, the update can fail. Please change one of
the MSNs or execute the update with the exchange.
For further information refer to the previous chapter.
If you do not operate your smar-tel-i with an Auerswald PBX, then an exchange
access code is not entered as a prefix to the server telephone number.
5. 13. 2
Updating Other System Telephones (only for AUERSWALD PBXs)
