User Manual smar-tel-i
69
Progr
am
mi
ng
smar-tel-i includes an automatic update of the telephone software. This update is without
cost with the exception of charges for the necessary telephone connection. Accordingly,
your software will always be up-to-date even if the provider initiates modifications. Our
objective is to integrate any changes as quickly as possible into the current software. There-
fore, should any problems with functions appear in your smar-tel-i, then first of all execute
an update. If this does not solve the problem, then please ask your dealer.
You should try to avoid updating in the middle of a business day since smar-tel-i does not
support any telephone functions during this time period. After smar-tel-i has been able
to establish a connection, the entire procedure can take up to 15 minutes.
Example: Initiate a software update over the external line:
h
If the update is interrupted during transmission (e. g. due to faulty transmission), then
changing the telephone number and a new update start is necessary.
By pressing the soft-key under “End“ or “Stop“, the software update can be aborted.
Please refer to the preceding information above.
If the update is aborted by smar-tel-i during the message “Establishing a Connection“,
then either a wrong number has been dialed or the number called is busy.
Recheck the telephone number and change it if necessary before the update is started
again. When aborting in this phase of the update, smar-tel-i still has command of all
telephone functions.
5. 13
Software-Updates
5. 13. 1
Updating the first (or only) System Telephone
Search for the function under the menu group
PHONE
INSTALLATIONS
ok
A
Open the menu and confirm the display mes-
sage “next“.
ok
rA
The telephone number of the server is shown.
Prefix this number with the exchange access
code and, if necessary, a foreign country
access code, for example.
Confirm the entries.
(Inputting numbers: refer to page 32).
smar-tel-i attempts to establish a connection
to the server.
The connection to the server is established.
The progression of the transmission is shown.
(One vertical block = 1% accomplished).
The update is successfully terminated. After a
few seconds, the display returns to a non-wor-
king state.
Update software
ok next
Tel No 053069200500_
End Delete ok
Call Set-Up
Stop
Synchronized
End
____________________
_
_
_
_
____________________
End
_
Update ok! New
Software Starts
