42
User Manual smar-tel-i
Progr
am
ming
The following chapter describes the options that smar-tel-i offers you for controlling costs.
During a call the accumulated call charges are displayed after pressing the soft-key to the
right. This function presupposes the following technical considerations:
앫
It is an external outgoing (working) call.
앫
The call charge is activated.
앫
The performance feature “Advice Of Charge During the Call“ (AOCD) must be requested
from and activated by your provider.
Should one of these requirements not be met, only the length of the call will be displayed. If
only the length of the call is of interest, then the call charge display can be deactivated with
the following function.
Example: Deactivate the “advice of charge during the call“.
h
The cost per unit charge rate can be set in the menu-group PHONE-INSTALLATIONS.
(Refer to the chapter Charge Rates on page 45).
If the feature installed is the “advice of charge at the end of the call“ (AOCE), then the
charges accumulated during the call will only be displayed at the end of the call when
the receiver is replaced.
5. 5
Controlling Costs
5. 5. 1
Call Charge Display During and After a Call
Search for the function under the menu-group
USEFUL APPLICATIONS (refer to page 31).
change
A
Open the menu
off
A
Deactivate the advice of charge display.
ok
A
Store the setting.
Charge Indicator ON
change next
Charge Indicator ON
ok off
Charge Indicator OFF
ok on
