User Manual smar-tel-i
49
Progr
am
mi
ng
In order to be able to dial automatically when directly connected to the network terminal (i.e.
when not using a PBX), smar-tel-i has a direct-call function. When you enable direct call on
your smar-tel-i, the direct call number entered will be automatically dialed after picking up
the receiver and pressing any key (for example, this allows a small child to dial without
assistance in an emergency). As long as the direct-call function is enabled, only the tele-
phone number that has been entered can be called. It is not possible to initiate another call.
If the direct call is enabled, the middle LED signals green and the display shows the text
“Direct Call“.
Example: Enable a direct call / babyphone to the telephone number 0172 445678.
h
When you disable Direct Call, you do not nesessarily have to delete the telephone num-
ber you have entered. Simply confirm with “ok.“ In order to enable Direct Call the next
time, you only need to switch it to “On“.
A direct-call number may not be input as a blocked (disabled ) number.
If a user-account is installed, a direct call is not possible.
If blocked (disabled) dialing is activated, a direct call is not possible.
When blocked (disabled) dialing is activated, calls can still be received without limita-
tion.
5. 6. 3
Direct Calling / Babyphone
Search for the function under the menu-group
SETTINGS
(refer to page 31).
change
A
Open menu.
change
A
Initiate entering the direct call number.
ok
rA
Input the direct-call telephone number and
store.
(Inputting numbers: refer to page 32).
ok
A
Change to On/ Off.
on
A
Switch Direct Call to On.
ok
A
Store the setting.
Babyphone OFF
change next
No.:
ok change
No.: _
ok del
No.: 01724445678
ok change
Babyphone OFF
ok on
Babyphone ON
ok off
