User Manual smar-tel-i
27
Op
e
ra
ti
o
n
If the door terminal is connected to your AUERSWALD PBX, you can open the door with the
smar-tel-i without first speaking with the visitor. If a doorbell is pressed whose signal is
switched to your device, then your smar-tel-i rings and displays a doorbell in the display.
If you are in the middle of a call when the doorbell rings, the doorbell will be displayed,
regardless of the doorbell setting.
Example: The doorbell rings, and you want to speak with the visitor before opening
the door.
Example: The doorbell rings while you are in the middle of a call, and you would like
to speak with the visitor without terminating your current call.
h
As soon as “open“ is seen in the display, you can open the door by pressing the soft-
key under it. The display will only offer “open“ when the second relay is installed as door
relay and the subscriber has been authorized to open the door (refer to the PBX User
Manual).
As soon as “Light“ has been offered in the display, the third relay can be switched by
pressing the soft key under it. By pressing the soft-key under “open,“ the door can be
opened and the third relay can be switched simultaneously. “Light“ will only be offered
in the display if the third relay is installed and is set as a door relay (for example, stair-
well light). (Refer to the PBX User Manual).
4. 5
Doorbell and Door Voice Contact (only for AUERSWALD PBXs)
c
b
Accept the call from the door.
open
A
Open the door and, at the same time, switch
the third relay (stair-well light).
a
Terminate the door voice contact.
Door
A
Open the door menu.
ok
A
You are still speaking with the external subs-
criber.
Accept the door voice contact (consultation).
The external subscriber waits on hold.
Doorbell 2
End ok open Light
Door terminal
End open Light
Door terminal
End open Light
008154711
End Con2 Door Cost
Doorbell 1
End ok open Light
2: Door terminal
End Con1 open Light
