12
User Manual smar-tel-i
Oper
ati
o
n
Example: Dialing using the number pad.
h
Instead of picking up the receiver, you can press the loudspeaker key at any time. You
can then hear and speak without touching the phone. As soon as the receiver is picked
up, the loudspeaker automatically turns off.
Various alternatives to this traditional manner of dialing are described in the chapters
that follow.
Dialling or calling a subscriber can be aborted by pressing the soft-key under “End“.
Renewed dialing can then be started.
Do not forget to enter the external line access code “0“ for external calls unless your
device is programmed in the AUERSWALD PBX as a direct external device. In this
case, please read the chapter Dialing Directly with an External Phone (only for AUERS-
WALD PBXs) on page 16.
4. 2
Calling Another Subscriber
b
r
Dial the phone number.
You see the numbers being dialed.
The call is completed for the subscriber being
dialed. (Alternative text-displays after dialing:
refer to page 17).
If you do not operate your smart-tel-i with an AUERSWALD PBX, but rather connect
it directly to the network of your EURO-ISDN interface, then the call will not be dis-
played. You merely hear the ringing.
Dial: 3:--3-----
End < > 4:-2-----8
Dial: 0_
End
008154711 Call
End
