Descr
ipt
ion
User Manual smar-tel-i
3
O
p
erat
ion
Tabl
e of Content
s
G
e
tt
ing star
ted
P
rogramming
Appendi
x
Inde
x
Dear Customer,
Thank you for deciding to purchase our smar-tel-i.
smar-tel-i is a versatile and easy to use system telephone. As soon as you connect smar-
tel-i to an AUERSWALD-PBX with internal S
0
bus, the PBX teaches it everything necessary
to function as a system telephone on this exchange.
Similarly, handy menu-guides assist you in using the important functions within the PBX.
You also have the option of assigning PBX switching functions to six programmable keys.
Additional comfort is offered by the PBX allocation scheme display that is offered to you
when you lift the receiver. Here, for example, you can see in advance whether the internal
phone that you want to call is busy or not.
You can also operate the smar-tel-i directly on the Telekom network termination or on that
of another provider (see the chapter on Technical Data on page 76 for stipulations). In this
assistance, smar-tel-i even assumes some of the functions that are normally executed by a
PBX, e. g. management of call charges.
e
Almost without exception, this manual will present operating or programming instruc-
tions for the smar-tel-i system telephone in conjunction with an AUERSWALD PBX.
Any operating deviations are described in a special reference at the end of the chapter.
This manual refers to the AUERSWALD PBX models ETS-4308 I and ETS-2204 I.
Please note that in some countries AUERSWALD PBXs are markered and sold
under different brand names. If you should own a different AUERSWALD PBX with
internal S
0
port, then please refer to the information regarding the smar-tel-i in the PBX
manual.
The internal S
0
bus of an AUERSWALD PBX accepts up to four smar-tel-i telephones.
The smar-tel-i does not have the FLASH or R keys which are described in the manuals
of the AUERSWALD PBXs. Functions activated by the R key according to the PBX
manual can be easily executed with smar-tel-i’s soft-keys. For example, dialing a new
number during an active connection can be initiated with the soft-key “Con2“.
