50
User Manual smar-tel-i
Progr
am
ming
In some cases when operating a PBX, the exchange access code must also be
entered. You can determine whether this is required in your case by reading the chap-
ter Alternatives for Initiating Exchange Line Access on page 35.
Disabled Dialing almost completely blocks dialing with smar-tel-i. Calls can be received but
no call can be initiated except for the emergency numbers and the special emergency
numbers if installed. (Refer to the chapter Special Emergency Calls on page 51).
If dialing is disabled, the middle LED signals green and in the display over the right soft key,
the word PIN appears. In addition, any attempt to dial a number prompts the message “Blok-
ked Dialing.“
Example: Activate blocked dialing on the smar-tel-i.
Example: Deactivate blocked dialing on the phone.
If you are operating an AUERSWALD PBX, please use the PBX function “Imme-
diate connection without dialing“ instead of this telephone-integrated function.
(Refer to the PBX user manual).
5. 6. 4
Disabling the Dialing Function
Search for the function under menu-group
SETTINGS
(refer to page 31).
change
A
Open the menu.
ok
rA
Enter a four-digit PIN (“0000“ Factory default
setting) and confirm.
(Inputting Numbers: refer to page 32).
on
A
Activate blocked dialing.
ok
A
Store the setting
PIN
A
The display is inoperative when blocked
dialing has been activated.
Initiate entering the PIN.
ok
rA
Enter a four-digit PIN (“0000“ Factory default
setting) and confirm.
Following the menu in order to deactivate (see
above ).
(Inputting Numbers: refer to page 32).
Dial Lock OFF
change next
PIN Input: _
ok
Dial Lock OFF
ok on
Dial Lock ON
ok off
13.12.97 14:15
--> PIN
PIN Input: _
ok
