16
User Manual smar-tel-i
Oper
ati
o
n
You have the option of installing your smar-tel-i in the AUERSWALD PBX as a direct exter-
nal device (program function: refer to the respective PBX manual). This has the advantage
that it is no longer necessary to dial the external line access code “0“ along with the number
to be called.
In order to telephone internally, or to use target dialing or to program with a direct external
device, other telephones first require that the
C
-Key be pressed. Your smar-tel-i menu will
guide you when making internal calls.
Example: Calling an internal subscriber and then directly with an external telephone.
h
If you want to call an external subscriber directly with an external telephone, dial the
number while omitting the external line access code “0“ immediately after picking up
the receiver.
If you wish to dial an extension number before picking up the receiver (dialing prepa-
ration), then, a “star“ must be entered preceding the number to be called using the
*
-key.
A private or targeted exchange line access is accessed by pressing the soft-key
under “internal call“ and then dialing the respective number of the external line.
If you wish to program your AUERSWALD PBX with long rows of numbers it is rec-
ommended that this be done with the assistance of dialing preparation (refer to the
chapter Dialing Preparation on page 13). Then, however, you must enter a “star“ with
the
*
-key in front of each program number.
4. 2. 5
Dialing Directly with an External Phone (only for AUERSWALD PBXs)
b
Internal..
A
Terminate the existing external connection.
r
Dial the number of the internal subscriber.
(A programmed number or target dial number
is also possible in this case.)
Dial:
End Internal Call
Dial: 3:--3-----
End < > 4:-2-----8
