User Manual smar-tel-i
45
Progr
am
mi
ng
The charge rate determines the cost per call-unit and at delivery is factory set for each coun-
try. For Germany e.g. the charge rate is set at DM 0.12 and it can be varied in a range
between
DM 0.12 and DM 9.99; the currency may be changed as well.
Example: Set a charge rate of DM 0.20.
Example: Change the currency from DM to EURO.
h
If the charge rate is changed, the costs registered for the MSN and the total call
charge counters are then reset to zero.
The charge rate can be separately set for smar-tel-i and the AUERSWALD PBX call
charge function (refer to the PBX user manual). The telephone setting applies only to
the call charge display during a call, and to the total and the MSN call charge counters.
Setting the PBX differently is useful when smar-tel-i is used as a customer phone with
a higher rate (for example, a hotel). smar-tel-i then shows the amount that the customer
must pay while the PBX shows the costs that actually accrue.
5. 5. 4
Charge Rates
Search for the function under the menu-group
PHONE-INSTALLATION (refer to page 31).
change
A
Open the menu.
ok
rA
Enter a 4-digit PIN (“0000“ factory default set-
ting) and confirm.
(Inputting Numbers: refer to page 32).
r
Enter the desired rate per call charge unit.
(Inputting Numbers: refer to page 32).
ok
A
Store the setting.
Search for the function under the menu-group
PHONE-INSTALLATIONS (refer to page 31).
change
A
Open the menu.
r
Delete the old currency and enter the new cur-
rency.
(Inputting Text: refer to page 33).
ok
A
Store settings.
Chargeunit:DM 0.12
change next
PIN Input: _
ok
Chargeunit:DM §.12
ok
Chargeunit:DM 0.2§
ok
Currency: DM
change next
Currency: DM_
ok A>a del
Currency: EURO_
ok A>a del
