22
User Manual smar-tel-i
Oper
ati
o
n
While your call is in progress, the top display line contains information about the person with
whom you are speaking. Either you see the telephone number that he has transmitted or the
name that has been entered in the telephone book if it is available.
The lower display line offers you several functions which you can execute by using the soft-
keys.
The soft-key on the right allows you to switch between the call number (or name) and the
accumulated charges (or the accumulated time of the call). In order for call charges to be
displayed, the following requirements must be met (in all other instances, the duration of the
call is displayed):
앫
You have initiated an external (working) call.
앫
The call charge display is activated. (Factory default settings / refer to the chapter Call
Charge Display During and After a Call on page 42).
앫
The performance feature “Advice of Charge During the Call“ (AOCD) has been
requested from and activated by the provider.
Example: Retrieving call charges during a call.
h
When the charge display is deactivated, the soft-key to the right offers a switch to
“Time“ (accumulated call time).
The accumulated call charges during a call will be displayed when replacing the
receiver simply if the performance feature “Advice of Charge at the End of the Call“
(AOCE) is present at the end of a call (and assuming that the call charge display is
turned on).
From the menu group TELEPHONE-SETTINGS, the cost per unit charge can be set
(refer to the chapter Charge Rates on page 45). The factory default setting for this fac-
tor depends upon the country version of your smar-tel-i.
Terminating a call is not only possible by replacing the receiver; it is also possible by press-
ing a key should you wish to immediately place another call.
Example: Terminating a call by pressing a key.
4. 4
During a Call
4. 4. 1
Call Charge Information and Call Duration
Cost
A
Display charges for the current call.
No.
A
Switch back in order to display the name.
4. 4. 2
Terminating a Call
End
A
Terminate the call.
A new call can be immediately initiated without
replacing the receiver.
Müller
End Con2 Park Cost
12.24 DM
End Con2 Park No.
Müller
End Con2 Park Cost
