72
User Manual smar-tel-i
Progr
am
ming
If you merely wish to execute the first software update (refer to the chapter Software-
Updates on page 69), then the start of the updates for all the other smar-tel-i’s can be left to
the AUERSWALD PBX. The AUERSWALD PBX registers the new version number of the
smar-tel-i and starts updating the other phones serially at an appropriate time in a half-hour
rhythm. With the following program functions, you can activate / deactivate the automatic
start and determine the start-time (e. g. at night because smar-tel-i does not support any
telephone functions during updates). This function is deactivated in the factory default set-
ting. In the event it is activated, the start-time has been set at 00:00.
Activate / Deactivate the Automatic Start Mode for Software Updates:
Change the start-time for automatically executing updates:
5. 14. 3
Automatically Starting smar-tel-i Software Updates
B
8
O
975
S
Programming phone
Private Password
1: On / 0: Off
B
8
O
974
U
Programming phone
Private Password
4-digit time: 00-23 (hours) and
00-59 (minutes)
h
If an update is aborted (e. g. due to failed transmission) and not restarted by the
PBX, you may then find a telephone that no longer supports the telephone functions. In this
case, you must restart the update yourself (refer to the chapter Software-Updates on
page 69). If this update using an internal connection is not successful, then execute an
update over the exchange connection externally to the server.
