Installation & Operation Manual
96
Document # LTRT-92224
Mediant 8000
15.5
Preparing the IP Network Connectivity
The Mediant 8000 must be connected to the IP network for proper operation.
The Mediant 8000 may operate in different IP network topologies, including networks
with multiple VLANs and subnets. For more information, see Section 'Connecting the
Media Gateway to the IP Network' on page
and 'Appendix : Examples of IP
Network Connectivity Configuration' on page
Verify the configuration of the IP network available on the site and ensure the
following:
Two fully-redundant Layer 3 Ethernet Switches or Routers are available (to be
connected to the two ES boards).
1GB Ethernet interfaces are used
Switches are interconnected by at least 1Gb Ethernet interface (when interface
separation is configured and media traffic is aggregated, 3Gb interconnection
may be required).
Summary of Contents for Mediant 8000
