AudioCodes Mediant 8000, Installation, Operation & Maintenance Manual

Page: 686 / 924

Installation & Operation Manual 686 Document # LTRT-92224
Mediant 8000
Parameter
Name
Type Provisioning
Type
Description
IP Diff Serv Integer
0-63 Instant Sets the Diff Serv value for Premium Media
service class content (only if IP Diff Serv is not
set in the selected IP Profile).
Note: The value for the Premium Control Diff
Serv is determined by (according to priority):
1. IPDiffServ value in the selected IP Profile.
2. Premium Service Class Media Diff Serv.
Sig IP Diff
Serv Integer
0-63 Instant Sets the Diff Serv value for Premium Control
service class content (only if parameter
'Control IP Diff serv' is not set in the selected
IP Profile).
Note: The value for the Premium Control Diff
Serv is determined by (according to priority):
1. 'Control lP Diff serv' value in the selected IP
Profile.
2. Premium Service Class Control Diff Serv.
Voice Volume Integer
0-63 Instant Voice gain control in dB. Sets the level for the
transmitted (IP to PSTN) signal.
DTMF Volume Integer
0-31
Instant DTMF gain control in dBm.
Input Gain Integer
0-63 Instant PCM input gain control in dB. Sets the level for
the received (PSTN-IP) signal.
Note: This parameter is intended for advanced
users. Changing it affects other gateway
functionalities.
Enable Digit
Delivery Enum
Disable, Enable Instant The digit delivery feature enables sending of
DTMF digits to the destination IP address after
the Tel-IP call was answered. To enable this
feature, modify the called number to include at
least one 'p' character. The gateway uses the
digits before the 'p' character in the initial
INVITE message. After the call was answered
the gateway waits for the required time (# of 'p'
* 1.5 seconds) and then sends the rest of the
DTMF digits using the method chosen (in-
band, out-of-band).
Note: The called number can include several
'p' characters (1.5 seconds pause). For
example, the called number can be as follows:
1001pp699, 8888p9p300.