Installation & Operation Manual
202
Document # LTRT-92224
Mediant 8000
26.4.3
Configuring Media Gateway Board’s IP Addresses
The Media Gateway board must be configured with IP addresses for each IP subnet
included in the
Network Profile
attached to it.
To configure Media Gateway Board’s IP addresses:
1.
Click the
to access the Media Gateway status screen.
2.
Select the desired Media Gateway board.
3.
In the Actions bar, click
Lock
to stop the service on the Media Gateway board.
4.
In the Navigation pane, click
Networking
and then in the configuration pane,
click
Network Settings
; the Network Settings screen is displayed.
5.
Configure IP addresses for each subnet included in the
Network Profile
,
attached to the board (the table is automatically updated when/if the network
profile is changed).
6.
Configure Primary and Secondary DNS Server if required for each subnet
included in the
Network Profile
attached to the board.
Summary of Contents for Mediant 8000
