Installation & Operation Manual
616
Document # LTRT-92224
Mediant 8000
Parameter Name
Type
Provisioning Type
Description
Always Use
Route Table
Enum
Disabled, Enabled
Instant
Determines the Request URI host
name in outgoing INVITE
messages.
When set to Enabled, the device
uses the IP address (or domain
name) defined in the 'Tel to
IP/Outbound Routing' table as the
Request URI host name in
outgoing INVITE messages,
instead of the value entered in the
'SIP Group Name' field.
Routing Mode
Enum
NotConfigured,
RoutingTable,
ServingIPGroup,
RequestURI
Instant
Defines the routing mode for
outgoing SIP INVITE messages.
Not Configured – the routing is
done according to the selected
Serving IP Group. If no Serving
IP Group is selected, the device
routes the call according to the
'Tel to IP/Outbound IP Routing'
table.
Routing Table – the device
routes the call according to the
'Tel to IP/Outbound IP Routing'
table.
Serving IP Group – the device
sends the SIP INVITE to the
selected Serving IP Group. If no
Serving IP Group is selected,
the default IP Group is used. If
the Proxy server(s) associated
with the destination IP Group is
not alive, the device uses the
'Tel to IP/Outbound IP Routing'
table (if fallback enabled - see
'Proxy / Registration
Parameters').
Request-URI – the device
sends the SIP INVITE to the IP
address according to the
received SIP Request-URI host
name.
Summary of Contents for Mediant 8000
