Installation Guide
NXB-CCG-K
NetLinx® Clear Connect™ Gateway
Overview
The NXB-CCG-K NetLinx Clear Connect Wireless Gateway (
FG2606-868
) connects NetLinx
Controllers with Lutron's Clear Connect Occupancy Sensors. The Gateway includes a web
interface for simplified integration, configuration, and programming of Clear Connect
devices. When integrated with an AMX NetLinx Controller, installers now have a simple and
cost-effective path to offer smart room automation that includes light and AV control from a
single interface, occupancy sensing, scheduled shutdown and energy management.
Common Applications
The NXB-CCG-K is ideal for new and retrofit applications looking for the least costly way to
add AV control to a room. The NXB-CCG-K is designed to interface with Lutron's Clear
Connect Occupancy Sensors.
Features
•
Clear Connect Enabled
– Lutron's patented RF Technology uses a quiet band that is
essentially free of interference, ensuring reliable communication between system
devices
•
Create Light & Control Events with Room Occupancy
– Use the Clear Connect
Wireless Occupancy Sensor with RMS to automatically power-up and shut down the
lights and AV equipment to maximize energy conservation
•
Simple Web Configuration
– Browse to the NetLinx Clear Connect Gateway URL to
quickly add Clear Connect Enabled Occupancy/Vacancy Sensors
The NXB-CCG-K can control up to 31 devices at a time, and can configure up to ten devices
at a time up to that maximum through its Web Interface Pages.
Product Specifications
Important Notes
Proper orientation of the antenna helps ensure maximum range and the best performance.
The NXB-CCG-K should be positioned centrally to the devices being controlled, and as high
and clear of obstructions as possible. The NXB-CCG-K utilizes an omni-directional antenna,
which produces a circular pattern perpendicular to the antenna. For best performance, the
antenna should be positioned vertically (tip up or down, not sideways). Try to keep the
antenna at least 2 feet from metallic objects.
RF Device Placement:
All dimmers, switches, keypads and shades / draperies must be
located within 30 ft (9 m) of the NXB-CCG-K (FIG. 2).
Codes:
Install in accordance with all local and national electrical codes.
WARNING:
Using a DC adapter not rated at the proper specifications could damage the
NXB-CCG-K.
Cleaning:
To clean, wipe with a clean damp cloth. DO NOT use any chemical cleaning
solutions.
FIG. 1
NXB-CCG-K ClearConnect Wireless Gateway
NXB-CCG-K (FG2606-868) Specifications
Power Requirements:
•
Power Input:
600mA @ 5VDC, DC adapter optional
(5V DC, 3A).
•
Surge Protection:
To withstand surge voltages without
damage or loss of operation, in accordance with IEEE
C62.41-1991 Recommended Practice on Surge Voltages in
Low-Voltage AC Power Circuits.
•
Power Failure Memory:
Should power be interrupted, the
NXB-CCG-K will return to its previous state when power is
restored.
Front Panel Components:
Power/Status LED:
Displays power status and other system status indicators.
RF LED:
Displays the Tx / Rx activity on the RF link.
Ethernet LED:
Displays the connection status and Tx / Rx activity on the
Ethernet link.
Rear Panel Components:
CAT5 Cable Port:
Maximum cable length: 328 ft (100 m)
USB Cable Port:
Manufacturer use only.
Reset Button:
Press and hold for 20 seconds to restore the system to the
Factory Default settings.
Power Jack:
(IEC PELV / NECR Class 2). This product should be
connected to a safety isolating supply conforming with
EN61558.
Antenna
Power/Status LED
RF LED
Ethernet LED
Reset
CAT5 Cable
Port
USB Cable
Port
Button
5VDC Power
Jack
1”
(25.4 mm)
2.56”
(65.1 mm)
NXB-CCG-K (FG2606-868) Specifications (Cont.)
Operating Environment:
• 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity,
non-condensing.
• Indoor use only.
ESD Protection:
ESD protection to withstand electrostatic discharge without
damage or memory loss, in accordance with IEC 61000-4-2.
Communications:
• The NXB-CCG-K communicates to other Clear Connect
devices through RF.
• All devices must be located within 30 feet (9 m) of the
NXB-CCG-K.
Auto Discovery:
Supports the ZeroConf auto discovery protocol.
Dimensions (HWD):
•
Without antenna:
1” x 2 9/16” x 4 7/16”
(25.4 mm x 65.1 mm x 112.7 mm)
•
With antenna:
3 2/16” x 2 9/16” x 4 7/16”
(79.4 mm x 65.1 mm x 112.7 mm)
Weight:
0.3 lbs (136.08 g)
Certifications:
• CE
Included Accessories:
• NXB-CCG-K Installation Guide (
93-2606-68
)
Other AMX Equipment:
• CCD3-OCRB-P-WH, 868 MHz Ceiling Mount Occupancy/
Vacancy Sensor (
FG2606-44-WH
)
• PS-CCG 5 VDC, 3A Power Supply With 2.1mm Barrel
Connector (
FG423-61
)
FIG. 2
RF Configuration of NXB-CCG-K and Occupancy Sensors
30 feet (9 m) maximum
NXB-CCG-K
Power Source
Lutron Occupancy Sensors
Note:
Antenna
position for clarity
only. Antenna should
always be installed
upright.
