Installation & Operation Manual
586
Document # LTRT-92224
Mediant 8000
Parameter Name
Type
Provisioning
Type
Description
redirected (i.e., SIP Diversion
header) numbers.
Notes:
If the incoming ISDN-to-IP call
includes a Redirect Number, this
number is overridden by the
new called number if this
parameter is set to Copy After
Manipulation or Copy Before
Manipulation.
This parameter can also be
configured for IP Profiles.
SIP Hold to ISDN
Enum
Disabled, Enabled
Instant
Enables interworking of the Hold
and retrieve supplementary
service from PRI to SIP and vice
versa.
Notes:
This feature is only supported
for the QSIG and Euro ISDN
PRI variants.
For EuroISDN, it is only
supported from TE (user) to NT
(network).
Held Timeout (Sec)
Integer
-1 – 2400
Instant
Defines the time interval that the
gateway can allow a call to
remain on hold. If a Resume
(un-hold Re-INVITE) message is
received before the timer
expires, the call is renewed. If
this timer expires, the call is
released.
Value -1 means that the call is
placed on hold indefinitely until
the initiator of on hold retrieves
the call again.
Voice Mail Interface
Enum
None(0), QSIG(3)
Instant
Enables the voice mail
application on the gateway and
determines the communication
method used between the PBX
and the gateway.
Summary of Contents for Mediant 8000
