Installation & Operation Manual
120
Document # LTRT-92224
Mediant 8000
7.
Enter the unique hostname you designate for the SC board. Press
Enter.
Hostname [client33]:
SC1
8.
Enter the unique IP address for the SC board and press
Enter
. The provisioned
address is an "private IP address" of the SC board that may be used for
connecting to it even when the Media Gateway software is not running.
IP address [10.6.8.33]:
10.7.13.91
9.
Enter the subnet mask for the SC board and press
Enter
.
Subnet Mask [255.255.0.0]: 255.255.0.0
10.
Enter the IP address for the
Default Gateway
and press
Enter
.
Default Gateway [10.6.0.1]:
10.7.0.1
11.
To apply the new configuration, type
y
and press
Enter
.
According to IP and mask, network is 10.7.0.0.
Start configuring (y/n) ? [y]:
y
>>> Updated /etc/hosts ...
>>> Updated /etc/nodename ...
>>> Updated /etc/defaultrouter ...
>>> Updated /etc/hostname.dmfe0 ...
>>> Updated /etc/netmasks ...
>>> Updated hostname ...
Done
12.
The SC board must be rebooted to activate the new configuration. To reboot the
SC board, type
y
and press
Enter
.
SC board must be rebooted to activate the new
network configuration.
Reboot now? (y/n) [y]:
y
13.
If the Media Gateway software is installed on the SC board, you will receive the
following additional warning prior to reboot:
After reboot completes, re-login to the SC board
(using new network settings), run "install" command
and choose options
3
or
4
to re-configure the Media Gateway software to
match the new network settings.
Perform the procedure as described in the above message – i.e. re-login to the
SC board after the reboot, run i
nstall
command and choose option
3
or
4
(on
SC1 and SC2 correspondingly) to re-configure the Media Gateway software.
Failure to complete this procedure will prevent the Media Gateway software from
running.
Summary of Contents for Mediant 8000
