Atmos ACD 03 Operation Manual Download

Page: 44 / 292

Operation manual - EN

www.atmos.eu

EN - 44

ACD03/04

After setting (planning), switch on the automatic wood ignition function

by pressing the green

START button.

CAUTION – Before confirming, check the retracted (closed) ignition valve and the

properly closed and secured door (locking screw) and cleaning apertures.

If the function is activated properly, the automatic wood ignition icon is displayed on the main

screen next to the flashing hand button . The information icon

shows an overview of the plan and

the status (on/off) of the ignition spiral.

When the automatic ignition of wood is started, the boiler exhaust fan and the ignition spiral are tur-

ned on. Everything is indicated by the flashing of the automatic ignition symbol next to the hand

symbol button .

7. Buttons and information on the screen

Summary of Contents for ACD 03





































































































































































































































































































Search results

Summary of Contents for ACD 03

Reviews:

Related manuals for ACD 03

Brands by name

Popular brands

Atmos ACD 03, Operation Manual

Search results

Summary of Contents for ACD 03

Reviews:

Related manuals for ACD 03

Brands by name

Popular brands