Atmos ACD 03, Operation Manual

Page: 134 / 292

Operation manual - EN
www.atmos.eu
EN - 134
ACD03/04
SMA – alarm output - at the moment of occurrence of any alarm, the output is closed. The
function can be used to send error information via the GSM gateway.
ZUP – output of circuits demand and DHW - at the moment of demand of the circuits heating
and DHW heating, the output is closed.
The function can be used to open the backup energy supply for heating the building (for
example, district heating). After the demand is canceled, it is switched off with a delay
defined by → General setting menu - P01
General setting
parameter.
TIMER 1, 2, 3 or 4 – comfort mode output - the function is the comfort time output of AUTO,
VISIT or COMFORT mode, i.e. the assigned output is closed whenever Comfort mode
is active.
The function has no connection to the heating system, it can be used, for example, to switch
the electric heating in the bathroom, pool technology, heating the driveway, turning on the
lights, etc. The function does not create any requirement for heat source. The setting of the
working mode is the same as for the heating circuit - selection in the working mode window,
definition, copying in the
→
0 24
Time programs submenu, etc.
10. Setting menu - Hydraulics
/F
unction configuration/General setting