Atmos ACD 03, Operation Manual

Page: 113 / 292

Operation manual - EN
www.atmos.eu
EN - 113
ACD03/04
10. Setting menu - Hydraulics
/F
unction configuration/Heating circuit 2 function
RSb (a, c, d) – room temperature - the button is used to assign the terminal of the connected
ARU5
room unit (sensor) to the selected heating circuit.
Before assigning the terminal, the room unit must be connected and assigned to the relevant
heating circuit → Hydraulics / Function configuration / Heating circuit 2 function /
RS(E)2 - Room sensors.
After assigning the terminal, the temperature of the relevant sensor is displayed.
Connection of ARU5 room unit (sensor) to ACD 03/04 controlle
M
B
A
MK2C
MK2O
VF2
AF (4)
WF (5)
ATMOS
ACD
2 - 6 bar
10 – 15 °C
RSb
DKP (59)
MKP2
ATMOS
ARU5
ARU5
RS GND
ACD 03/04
VIxx GND PE
INFO - The connection of the ARU5 room unit (sensor) is always made with a shielded
wire (double line) to one of the variable inputs.
Sensor terminal assignment (ARU5) - RSb (a, c, d)
RSEb (a, c, d, e) - room temperature - type of room sensor and its current temperature
(information only) for
ARU10 and AR30 room units
INFO - The current room temperature RSEb (a, c, d, e) is visible only after the ARU10
and ARU30 room unit activation and its assignment to the heating circuit (menu →
Hydraulics / Communication / ARUb (a, c, d, e) / Controlled circuit).