AT-OS S.r.l.
Viale del Lavoro, 19 37030 Colognola ai Colli (Verona) Italy
Tel. ++39 045 6159411- Fax ++39 045 6159422 - e-mail: [email protected] – www.at-os.com
64
E84: Cycle X interrupted
Cycle number "x" has been interrupted either due to an interruption in the electrical power supply or
following manual interruption of the wash cycle (by pressing the emergency push-button). The message
warns that the process has not been completed and invites the user to select whether to repeat the wash or to
interrupt it definitely. The machine is blocked and the door cannot be opened.
To repeat the interrupted wash cycle press the push-button for the program in question (the signal LED is
flashing) and the cycle will restart from the beginning as if it had just been selected;
To cancel the program, press the Reset push-button.
E85: Cycle Aborted
The "reset" key has been pressed following the “E84: X cycle interrupted" message. The machine asks to
select whether to cancel or repeat the cycle in order to receive double confirmation of the operator’s
intentions (to avoid accidental pressings of the key or mistaken selections).
This warns that the cycle has been deliberately cancelled but gives a second possibility for repeating the
wash;
To repeat the interrupted wash cycle, press the program push-button in question (the signal LED is flashing).
The cycle will restart from the beginning as if it had just been selected;
To cancel the program, press the Reset push-button. The machine will go back to Stand-by.
E86: Chamber Overheat
A temperature in the wash chamber has been detected that is higher than the safety temperature (set using
the "alarm temp. delta” parameter: washing has been interrupted beforehand and the final rinse performed
in advance in order to lower the temperature in the wash chamber.
Wait a few minutes and then press Reset: the machine will go back to stand-by.
If the problem persists contact the AT-OS S.r.l. Service Department.
Summary of Contents for AF2 C Series
Page 67: ......
