AT-OS S.r.l.
Viale del Lavoro, 19 37030 Colognola ai Colli (Verona) Italy
Tel. ++39 045 6159411- Fax ++39 045 6159422 - e-mail: [email protected] – www.at-os.com
51
6.15 REPLACING THE AUTOMATIC DOOR PIN
Open (not completely) the door of the appliance wash basin. Cut off power to the appliance by turning the
service switch, located in its upper compartment, off. Also turn the main switch on the external electrical
supply mains to off.
Remove the side cover on the right side of the lower compartment. Unscrew the screw that fix the actuator to
the appliance. Then unscrew the screw that fix the actuator to the steel plate which move the door. Keep
stopped the door because it can fall. Replace the actuator and reinstall all the components.
Restore the electrical supply and check if the door works correctly, paying attention to the movement
performed by the mechanism. Turn the machine off and reinstall the cover. Turn the machine on.
Summary of Contents for AF2 C Series
Page 67: ......
