Associated Research HypotULTRA 7800, Operation And Service Manual

Page: 174 / 206

169
IP Setup is used to determine how the HypotULTRA will request an IP address from
the server to which it is connected. When AUTO is selected, the HypotULTRA will
attempt to automatically request an IP Address from the server upon power up. To
resolve the IP Address automatically, the HypotULTRA will use DHCP or BOOTP
protocols. When MANUAL is selected, the HypotULTRA will request a specific IP
Address from the server. The IP Address that will be requested must be entered in the
subsequent IP Address parameter field.
Select a value and use the enter key (
↵
)
to save the entry and move to the next test
parameter, IP Address.
IP Address
Touch the IP Address icon to access the IP Address parameters:
A specific IP Address must be entered into this field if the IP Setup parameter is
configured to MANUAL. Enter the IP Address that you wish using the numeric keypad.
The IP Address must be entered in the following format: XXX.XXX.XXX.XXX. A valid
IP Address must be entered. Users may not use the following IP Addresses:
255.255.255.255
000.000.000.000
Enter the preceding IP Addresses will cause the following error message to be
displayed:
Select the ENTER (
↵
)
key to save the new settings. If the IP Setup parameter is set to
AUTO, you do not need to enter an IP Address manually.
Gateway IP
Select the Gateway IP parameter using on the touchscreen. Enter the appropriate
Gateway IP.