Associated Research HypotULTRA 7800, Operation And Service Manual

Page: 161 / 206

156
OPTIONS
Introduction
This section contains a list and descriptions of available factory installed options
at the time of this printing. The list of options contains an option code number
that can be referenced on the data plate on the rear panel of the unit.
Option Label
On the rear panel of the instrument, you will find a label that contains the option
code.
For example, your options code would appear as follows:
Fitted with option 01........................................................ OPT: 01
Fitted with option 01 and 08............................................ OPT: 0108
HypotULTRA Options
Option List
CODE DESCRIPTION
01 Internal 8 Channel Scanner with
Continuity (7820 & 7850 only)
02 Internal 4 Channel Scanner with
Continuity (7820 & 7850 only)
04 3mA AC/DC Output (7820 & 7850 only)
05 5mA AC/DC Output (7820 & 7850 only)
07 Printer Port (7820 & 7850 only)
08 GPIB Card (all models)
09 Ethernet Card (all models)
10 Burn Hipot Test (7820 & 7850 only)
11 Continuity Delay Timer (7820 & 7850
only)
12 Negative DCW (all models)
13 400/800 Hz Hipot Output(all models)
14 Mimic HU3 Command Set (7820 & 7850
only)
01 Internal 8 Channel Scanner with Continuity
The Scanner option provides 8 high voltage/continuity channels on the rear panel
of the HypotULTRA. The high voltage/continuity channels can be set to a High
(H) or Low (L) level giving the operator the capability to test from one channel to
another channel or from any channel to a common Low or Return point. The
channels can be connected in parallel if desired but there is only one leakage
current measurement for all channels.