13
ASSA ABLOY Hospitality
66 8003 016-3
3.1.3 To mount a thermostat
Figure 6
Figure 7
Figure 8
1a. If US single gang box is
applicable:
mount the wall
bracket to the
US single gang
box
according to
Figure 6
,
using the two screws that are
enclosed with the
US single
gang box
.
1b. If EU junction box is applicable:
mount the wall bracket to the
EU junction box
according to
Figure 7
, using
the two screws that are enclosed with the
EU
junction box
.
1c. If the fastening holes do not fit
the installed junction box, or if no
junction box is installed:
use a
PZD-2
screw driver to mount the wall bracket
with the four enclosed 3.5x25 screws.
2. Connect to the two terminal blocks according to
here
.
Note:
See a description of the different inputs and outputs in
the sections
Low voltage terminal block
and
High voltage terminal block
.
Figure 9
Figure 10
Figure 11
3. Use a
PZD-2
screw driver to
fasten the cover for
wall bracket with the two
enclosed 3.5X9.5 screws.
4. Snap the front plate onto the thermostat.
5. Snap the thermostat onto the
wall bracket.
Figure 12
Figure 13
6. Push to lock the thermostat from the top and from the bottom.
