11
ASSA ABLOY Hospitality
66 8003 016-3
3.1.1 Step-by-step procedure
For a new thermostat, the following steps must be followed:
Figure 3: Service cable RJ12 to 3.5mm
stereo jack (Art. No 205 999 008)
Figure 4
1. Make sure that the thermostat has got the
latest available firmware:
- Plug the service cable (see
Figure 3
) into
the thermostat.
- In
Orion Service
(see
Figure 4
): choose
the
Versions
alternative and click the
Readout
button. See
Quick reference guide
Orion Service
for more information about
the software.
2. Mount the thermostat according to
here
.
3. Add the thermostat to the
Thermostats
list in
Visionline; in the
Thermostat details
dialog
you should also choose the profile to which
the thermostat should belong. If no applicable
thermostat profile exists in Visionline, create
one according to
chapter 4
.
4. Initialize the thermostat with room number
and also with parameters according to the
chosen thermostat profile; follow the
Initialize
section in
Quick reference guide Orion Service
.
Note:
If one or more parameters of a
thermostat profile are at a later occasion
updated, these new parameters will
automatically be sent to all concerned online
thermostats. If the thermostats are not online,
they are updated via the
Initialize
alternative
in
Orion Service
.
5. Make external connections according to
here
.
6. If the thermostat should be online, set it up in
the online network according to the chapter
To
commission the system
.
