61
ASSA ABLOY Hospitality
66 8003 016-3
To initialize the master thermostat with suite settings
1. Choose
Initialize
in the left pane of the
Orion Service window.
2. In this example, the
master thermostat
is in room 102 (
room A
in
Figure C10
).
Connect the service cable to the
thermostat in room 102.
3. Click the plus sign for the applicable
door area(in this example 'Floor 1') and
mark room 102.
Figure C13
4. At
Suite settings
:
- Enter the
Suite room
(
slave room
);
in this example 103 (room B in
Figure
C10
).
- Leave the
Share occupancy
checkbox empty; this is only
applicable when there is just one door
to the entire suite;
click
here
for more information about
that configuration.
Figure C14
5. Click the
Initialize
button.
Note:
It is only the
master room
that
is initialized with suite settings, so
steps 1-4
above are never performed
for the
slave room
.
Figure C15
Online network tree
When steps 1-4 below have been performed, the
Online Network
tree in SysMon
will typically look as in the example in
Figure C16
:
1. The thermostats have been initialized
with "regular parameters", i.e. all
parameters except for those related to
suite.
2. Thermostats, motion sensors and guest
room locks have been connected to the
online network according to
chapter 5
.
3. The master room thermostat has been
initialized with suite settings according
to
here
.
4. The status of the master room
thermostat and of the slave room
thermostat has been read out according
to
here
.
Figure C16
