9
ASSA ABLOY Hospitality
66 8003 016-3
2. To install the software
2.1 To install a Visionline option
If the
Orion EMS option
(and
Online option
) has been ordered together withthe
Visionline software, it is included in the license code and will be set in the software
when the license code is entered. If the option(s) should be added to the system at
a later occasion, when the license code has already been entered and system ID is
therefore set, an option code is used instead. Several software options can be included
in one option code. An operator with the authority to handle option codes must be
logged on. Normally, options are set by the system manager or the distributor.
When ordering the option, the system code must be communicated to the
ordering department:
1. Double click on
System settings
under the
Reports
tab in the navigation window
of Visionline.
System settings
is available even if you are not logged on.
2. Communicate your system code to the order department; see order
acknowledgement for phone number and e-mail address. The system code
can also be entered in the
Ordering web page
when making the order.
To install an option:
1. Go to
Tools/Option code
in Visionline.
2. Enter the option code and click
Apply
Figure 1
2.2 To install an Orion EMS client
If there should be a separate Orion EMS client (see
chapter 1
for more information),
this is installed according to the ReadMe file for the applicable operating system.
The ReadMe files are found on the Orion EMS software CD.
2.2.1 To start an Orion EMS client
1. Click the
Start
button and go to
Programs/Orion EMS/Orion EMS
.
2. When requested, log on with the same user ID and password as for Visionline.
