42
ASSA ABLOY Hospitality
66 8003 016-3
Figure 58
15.
Pre-condition time
is
the number of hours the
thermostat shall run at
the
default setpoint
after check-in. If no
entry has been done
when this time expires,
the unoccupied setback
will be assumed.
The pre-condition time
can be 1-12 hours or
'disabled' (default is
2 hours).
Note:
This parameter
requires that the
Online
option
has been set in
Visionline.
Figure 59
16.
Default set point
is
the temperature which
the thermostat is set
to until a guest changes
the temperature. The
thermostat will also
return to the
Default
set point
after check-
out.
Figure 60
