64
ASSA ABLOY Hospitality
66 8003 016-3
To configure the door switches
1. Choose
Configure device
in the
left pane of the Orion Service
window.
2. Choose
Door switch
in the upper
part of the Orion Service window.
3. Plug the service cable into the
door switch at the guest door in
room 102.
4. Select
Connecting door
in the
Orion Service window.
5. Repeat
steps 3-4
for:
- the door switch at the
connecting door in room 102
- the door switch at the guest door
in room 103
- the door switch at the connecting
door in room 103
Example of suite status for
master room thermostat
:
Figure C19
Online network tree
When steps 1-4 below have been performed, the
Online Network
tree in SysMon
will typically look as in the example in
Figure C20
:
1. The thermostats have been
initialized with "regular
parameters", i.e. all parameters
except for those related to suite.
2. Thermostats, motion sensors and
door switches have been connected
to the online network according to
chapter 5
.
3. The master room thermostat has
been initialized with suite settings
according to
here
.
4. The status of the master room
thermostat and of the slave room
thermostat has been read out
according to
here
.
Figure C20
