Array electronic 3750A, Manual

Page: 30 / 120

Chapter II Functions & Features
25
ARRAY
operation state, select CVL or CVH mode via dynamic key, then enter the voltage
value via the keypads or knob combining with and keys, finally confirm the setting
with key. The CV mode and the parameters can also be set via the remote commands:
MODE CVL|CVH
VOLTage <NRf+>
Fig. 2-2 CV Mode
2.3.2.1 Voltage Setting Range
The setting ranges of the voltage for the load are listed as follows
Model 375XA
Voltage CVH 0~240V
CVL 0~24V
2.3.2.2 Immediate Voltage Level
The immediate voltage level is the voltage set value in CV mode, which can be set in parameter
set menu in voltage mode, or can be set via remote command: VOLTage<NRf+>. In CV mode, the
immediate voltage level can directly be modified via , or knob.