Array electronic 3750A, Manual

Page: 20 / 120

Chapter I General Introduction
ARRAY
15
Mode CRH indicates constant resistance high range;
CRL indicates constant resistance low range;
Input State ON/OFF;
Run Time To display the time the load being ON, reset when shutdown or switch
mode;
Para Set
To set the constant resistance value, unit:KΩ;
Volt Start To set the start voltage of the load, 0 indicates the function being not
enabled;
Res Limit To limit the minimum resistance level at the mode
RiseRate To control the current rising rate when starting
FallRate To control the current falling rate when starting
key
Press this dynamic key to return to the main menu;
key
Press this key to switch between CRL and CRH;
key
Press this key to enter the transient operation;
key
Press this key to enter list operation.
1.6.5.3 CV Mode Menu
Description
：
In Constant Voltage Mode, the load units will maintain a constant voltage value by
varying the current. For more details on CV Mode, please refer to Page 54.