Ｃｈａｐｔｅｒ ＩＶ Ｌｏｃａｌ Ｏｐｅｒａｔｉｏｎ
74
ARRAY
procedures are shown as below:
Step 1:
Press dynamic
key to enter into transient mode and the parameter setting menu;
press
key to enter into
mode; then press dynamic
key to
mode; as in the following diagram
：
Step 2:
Select “L_Level” via
key or
and
keys; enter the transient low level
10 by the number keypad, or via knob with
and
keys; then press
key to
confirm;
Step 3:
Select “H_Level” via
key or
and
keys; enter the transient high level
150 by the number keypad, or via knob with
and
keys; then press
key to
confirm;
Step 4:
Select “LowTime” via
key or
and
keys; enter the low level time
0.40000 by the number keypad, or via knob with
and
keys; then press
key to
confirm;
Step 5:
Select “LowTime” via
key or
and
keys; enter the low level time
0.40000 by the number keypad, or via knob with
and
keys; then press
key to
confirm;
Step 6:
Select “RiseTime” via
key or
and
keys; enter the time for rising
edge 0.01000 by the number keypad, or via knob with
and
keys; then press
Summary of Contents for 3750A
