Array electronic 3750A, Manual

Page: 88 / 120

Ｃｈａｐｔｅｒ ＩＶ Ｌｏｃａｌ Ｏｐｅｒａｔｉｏｎ
84
ARRAY
Step 5: Press dynamic key to return to the initial operation menu.
The corresponding SCPI commands of the above procedures should be as follows:
LIST: NUMB 0
；
Call the sequence numbered 0
LIST ON
；
Start the list operation
LIST OFF
；
Stop the list operation
4.9 Saving and Recalling
The operation procedures for transient operation are shown as below:
Press dynamic key to enter into transient mode and the parameter setting menu, as
shown in the following diagram:
The saving and recalling operation procedures are as followings:
1.
Press SAVE key to enter into the saving menu as in the following diagram; or press CALL
key to enter into the recalling menu of the load:
2.
Press and keys or the knob to select the saving or recalling location;
3.
Press key to confirm. The parameters will be saved into the EEPROM. If the pointed
location has saved value in the EEPROM, the location will be green as in the above diagram;
4.
Select the saved location via and keys or via the knob and press dynamic Clear
key to eliminate the value of the location, then the location will not be green any more.