Ｃｈａｐｔｅｒ ＩＶ Ｌｏｃａｌ Ｏｐｅｒａｔｉｏｎ
61
ARRAY
Trigger Operation
Main Menu
4.3 Connecting to the Power Supply
Connect the positive pole of the power supply to the red terminal “+” of the input (INPUT) on the
rear panel, and connect the negative pole of the power supply to the black terminal “-” of the input
(INPUT) on the rear panel. If the input is connected reversely, the RV protection status of the load
will become effective. In this case, please re-connect the power supply and the electronic load.
After correctly connecting the power supply and the electronic load, press the
key and the
key to clear the RV protection status or restart the load. The details will be described in
“Clearing Protection Settings” as below.
4.4 ON/OFF of the Eload Input
The load can be turned on and off by pressing
key. The
key will be green
when the load is ON and then
key will be orange
when the load is OFF.
4.5 Basic Operation
The operation procedures of the basic test is as follows:
1.
Press function key
,
,
, or
to enter the mode and parameter
setting menu;
2.
Select the setting parameter by using
and
keys;
3.
Enter the set value via number keypad, or knob with
and
keys;
4.
Press
key to confirm;
5.
Press
key to open the input of the load.
Summary of Contents for 3750A
