Arkon FREESTYLE NAVIGATOR User Manual Download Page 133

Page: 133 / 195

OVER

Steps

Do This

Interpret your events.

a. Interpret the events using the notes about each type of

event in the table below:

b. Go to Step 7d.

(CM 60, CM 120,

and CM 10)

• Each recorded measure is displayed on one screen with its

date and time.

• Di

splays actual measures at the indicated intervals.

• Does

NOT display averaged measures.

• Use the

RIGHT Option button (Next) to move to the next

recorded CM reading.

• Each BG measure is displayed on one screen with its date

and time.

• All BG measures a

re displayed.

• A check mark

indicates that the measure was marked

as a control.

• U

se the RIGHT Option button (Next) to move to the next

recorded BG screen.

Insulin

Each recorded insulin event is displayed with type, dosage in

units, date, and time.

Meals

Each recorded meal event is displayed with its carbohydrate

value in grams, date, and time.

Exercise

Each recorded exercise event is displayed with its description,

duration in hours and minutes, intensity, date, and time.

State of Health

• Each recorded event is displayed with its description, date,

and time.

Note: Generic events do NOT include a description, just a

number that represents the event.

Generic
Alarm History
User Events

Event

Notes

Section 12

123

Review Reports and Edit Events

Summary of Contents for FREESTYLE NAVIGATOR




































































































































































































Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands

Arkon FREESTYLE NAVIGATOR, User Manual

Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands