Arkon FREESTYLE NAVIGATOR User Manual Download Page 70

Page: 70 / 195

Steps

Do This

Lance the site.

To lance your finger (grey cap):

a. Lightly touch the lancing device against the side of

your fingertip.

b. Press the release button.
c. Put the lancing device down.
d. Gently squeeze your finger, if needed, until a drop of

blood the size of a pinhead forms.

To lance your forearm (clear cap):
a. Hold the lancing device against the test site.
b. Press the release button.
c. Continue to hold the lancing device against the test

site as you:

i) Inspect the test site through the clear cap.
ii) Gradually increase pressure until the sample is the

size of this dot:

Important:

NOT

smear the sample as you do the

next step.

d. Lift the lancing device

straight up

Customer Care: 1-866-597-5520

Section 7

Calibrate Your System/Test Blood Glucose Manually

Summary of Contents for FREESTYLE NAVIGATOR




































































































































































































Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands

Arkon FREESTYLE NAVIGATOR, User Manual

Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands